Text
Analisis Pengaruh Beban Ekstrusi Dan Viskositas Terhadap Dimensi Produk Serta Perilaku Die Swell Pada Shoulder Wedge Menggunakan Two-Way Anova Dan Model Regresi
Shoulder wedge merupakan salah satu komponen penting pada struktur ban radial yang diproduksi melalui proses ekstrusi. Salah satu tantangan dalam proses ini adalah terjadinya fenomena die swell, yaitu pembesaran dimensi produk setelah keluar dari die akibat pelepasan energi elastik. Tugas Akhir ini bertujuan untuk mengetahui pengaruh beban ekstrusi dan viskositas terhadap dimensi produk shoulder wedge dan perilaku die swell, serta membangun model regresi untuk memprediksi dimensi berdasarkan parameter proses. Metode yang digunakan adalah percobaan faktorial penuh dengan dua faktor utama (beban ekstrusi dan viskositas) dan pendekatan statistik Two-Way ANOVA serta regresi linier. Hasil analisis menunjukkan bahwa beban ekstrusi dan viskositas secara signifikan memengaruhi lebar dan ketebalan produk, viskositas menjadi faktor yang paling dominan, serta tidak ditemukan interaksi antara beban ekstrusi dan viskositas karena bekerja secara independen dalam mempengaruhi dimensi produk berdasarkan perhitungan p-value tidak ditemukan interkasi antara beban ektrusi dan viskositas. Model regresi menunjukkan hubungan linier yang kuat antara rasio die swell dengan dimensi produk, dengan nilai koefisien determinasi sebesar 92,77% untuk lebar dan 97,51% untuk ketebalan. Berdasarkan hasil simulasi dan spesifikasi produk, kombinasi parameter optimal yang direkomendasikan adalah beban ekstrusi 1,22–1,28 kg/m dan viskositas 55 Mooney Unit. Hasil tulisan ini diharapkan dapat membantu industri dalam pengendalian dimensi dan optimasi proses ekstrusi shoulder wedge.
Kata kunci: die swell, shoulder wedge, ekstrusi karet, viskositas, beban ekstrusi, regresi
The shoulder wedge is one of the crucial components in the structure of a radial tire, produced through the extrusion process. One of the main challenges in this process is the phenomenon of die swell, which refers to the dimensional enlargement of the product after exiting the die due to the release of elastic energy. This Final Project aims to investigate the effects of extrusion load and viscosity on the dimensions of the shoulder wedge and the behavior of die swell, as well as to develop a regression model to predict dimensions based on process parameters. The method used is a full factorial experiment with two main factors (extrusion load and viscosity) and a statistical approach involving Two-Way ANOVA and linear regression. The analysis results indicate that both extrusion load and viscosity significantly affect the width and thickness of the product, with viscosity being the most dominant factor. No interaction effect was found between extrusion load and viscosity, indicating that they influence product dimensions independently, as shown by the p-value calculation. The regression model reveals a strong linear relationship between die swell ratio and product dimensions, with the coefficient of determination reaching 92.77% for width and 97.51% for thickness. Based on the simulation results and product specifications, the recommended optimal parameter combination is an extrusion load of 1.22–1.28 kg/m and a viscosity of 55 Mooney Units. This study is expected to assist the industry in dimension control and optimization of the shoulder wedge extrusion process.
Bibliografi halaman 46-47
Ketersediaan
Informasi Detail
- Judul Seri
-
-
- No. Panggil
-
03 TPKP 2025 c.1
- Penerbit
- Yogyakarta : Politeknik ATK., 2025
- Deskripsi Fisik
-
xiii, 61 halaman; 30 cm +CD.
- Bahasa
-
Indonesia
- ISBN/ISSN
-
-
- Klasifikasi
-
678-072 Sya a
- Tipe Isi
-
-
- Tipe Media
-
-
- Tipe Pembawa
-
-
- Edisi
-
-
- Subjek
- Info Detail Spesifik
-
Prodi TPKP
- Pernyataan Tanggungjawab
-
SYAIFA EZA SATRIA
Informasi Lainnya
- Artikel
-
-
Versi lain/terkait
Tidak tersedia versi lain
Lampiran Berkas
Komentar
Anda harus masuk sebelum memberikan komentar