Perancangan Mold Base dengan Sistem Two Plate Mold untuk Produk Spesimen Uji Tarik

Text

Perancangan Mold Base dengan Sistem Two Plate Mold untuk Produk Spesimen Uji Tarik

Mario Sariski Dwi Ellianto, MT. - Nama Orang; Robin Denis Aditias - Nama Orang; Pongky Lubas Wahyudi, MT. - Nama Orang;

A mold is a tool for printing plastic products. The way it works is by installing the mold on a plastic injection machine, and then the machine does the injection process to put molten plastic material into the mold. In the mold, there is a form that matches the shape of the product to be made. Before a mold can be used, u must be designed and manufactured. ATK Polytechnic of Yogyakarta has one injection molding machine with several molds available. The available molds do not yet have a design based on various information, analysis, and calculations, so this research will make a mold design that is expected to be a guideline for making plastic injection molds and is expected to be able to analyze the needs for cavities, parting lines, gates, ejector systems, etc. In this study, the design and calculation of mold construction, including the cavity, parting line, gate, ejector, cavity plate, core plate, runner, and cooling, were discussed. The purpose of this study is to determine how to design a basic mold construction with a two-mold plate system, with the resulting product being a tensile test specimen. The result of this tensile test specimen mold design is a mold base design drawing with a mold size of 300mm x 500mm x 254mm, the number of cavities being 2 cavities per mold, and the volume of the tensile test specimen mold being 16.7 cm²

Keywords: injection molding, mold, tensile test specimen

Ketersediaan

Ruang Karya Ilmiah 115 PD 2022 c.1

PD22000115

Tersedia namun tidak untuk dipinjamkan - No Loan

Informasi Detail

Judul Seri: -
No. Panggil: 115 PD 2022 c.1
Penerbit: Yogyakarta : Politeknik ATK., 2022
Deskripsi Fisik: 6 halaman., 30 cm, bibli. Hal 6
Bahasa: Indonesia
ISBN/ISSN: -
Klasifikasi: NONE
Tipe Isi: -
Tipe Media: -
Tipe Pembawa: -
Edisi: -
Subjek: molding
Info Detail Spesifik: -
Pernyataan Tanggungjawab: Mario Sariski Dwi Ellianto, MT.; Robin Denis Aditias; Pongky Lubas Wahyudi, MT.

Informasi Lainnya

Artikel: -

Versi lain/terkait

Tidak tersedia versi lain

Lampiran Berkas

Tidak Ada Data

Komentar

Anda harus masuk sebelum memberikan komentar